Ice Pond Universe

There are only 5 possible explanations of existence.
One is nothing exists as compared to something exists, which can be divided into 4 categories.
Two is that something always existed and always will exist.
Three is that something always existed and will come to nothing.
Four is that existence was created out of nothing and will always exist.
Five is that existence was created out of nothing and will come to nothing.
Which one of these 5 possibilities do you believe?
If you think there is nothing, why read further, it does not exist?
If there is existence, was it created from nothing or was there always something?
Will existence last forever or burn out into nothingness, not even ashes?
The only one that makes sense to me, personally, is #2 on the above list.
Whether our universe is synonymous with existence, one and the same, or one little droplet in an ocean of universes; my theory for the creation of the universe is called the Ice Pond Universe.
Based on the facts that the universe is expanding and cooling, which defies physics, and combined with the process by which cooling ice expands, keeping the fish alive; I have concluded the universe, as we know it, is like a big layer of pond ice.
No scientific understanding of the existence is possible until it is realized we are in a kind of side eddy where the ‘usual’ laws are not followed. In the same way there is an explanation of how ice on a pond expands, scientists have to discover the formula or mechanism by which the ‘universe’ is cooling and expanding. Then we will be able to take our first look outside the fish bowl and begin to understand the physicality of existence.
The formula for my theory is that Absolute lowest temperature is equal to Infinite highest temperature. (Complete Motionless equals Maximum speed.)

No Contact Orders - SAVE LIVES!

http://www.cbc.ca/canada/british-columbia/story/2007/09/05/bc-oakbay.html
For years I have communicated to the authorities and even written a technology company on how these lives could be saved.
When I was a Correctional Officer, we had an Electronic Monitoring Program to do surveillance of inmates on house arrest. It was scrapped, being deemed too cumbersome in favor of conditional sentences and incarceration. At the time, about 10 years ago, I suggested the equipment could be modified to be used as proximity alarms for no contact orders.
If they would have listened to me, several women would still be alive.
It is really quite simple. The offender wears a tamper electronic bracelet and goes about his or her daily life. Any attempt at removal results in the police and the victims getting a signal. The victims get a signal if the offender gets within a certain distance. You see, the victims wear receiver bracelets.
A few years ago, there was a terrible incidence of child abduction and car crash here in Nanaimo, resulting deaths. If the school had the receivers, the approach of the offender could have warned them to call the police.
The EMP 'bracelets' were cumbersome ankle bracelets. They could be much more streamlined with 'up to date' technology.

double sided monitors

This blog is a repository for my inventions and business ideas. A few weeks ago I saw a woman in a coffee shop giving a demonstration to Clients on her notebook computer. One Client would bend over her shoulder to see the screen and she would pick up the notebook and twist it around for the person across to see.
It got to me thinking. What I am about to say must have been thought of before? However, the product is not in production as far as I know. For me, it a completely original idea, as I have not heard or seen of the improvements I am about to suggest.
While the concept will be clear for an improved product, there are certain features of the idea I will not disclose here.
PCs could have two sided monitors. Okay, notebooks want to be light and compact, but for most sales people the extra 1 pound would be worth the versatility. As for desk top, flat screen PCs, I cannot think of a realtor, financial advisor, broker, car salesman, and so on that would not want the Clients sitting across the desk to be able to be shown a demonstration of the product in discussion.

precious love

This is a portion of a song a I wrote. Do not use it without my permission and license. The other posts are inventions and business concepts.
--------------
"Precious Love"
Precious love
is what your are to me.
to me
That's all I want to know.
Precious love, will like the flowers grow.
for us
for you
and yes
for me.
Precious love
is in your eyes today.
If you want,
but you don't have to say.
From your smile,
I know it's hear to stay.
Precious love,
will never go away.
---------
------- There's more.................

food conditioner

I love butter. Along with chocolate and bananas, butter, and other foods, such as coffee; we could benefit from storage containers that give us the option a temperatures warmer than the inside of fridges and cooler than room temperature, especially on hot days in the summer. Something that would keep butter from doing a melt down and bananas from turning over ripe, while not having to struggle a hard brick or cold tasting bananas.

Presently, high end fridges have butter conditioners, however the door has to be opened to access this compartment.

My ideal fridge would have compartments on the outside of the door. They would have airtight, clear, sliding doors to quickly access butter, bananas, chocolate, oranges, coffee and other foods that would thrive on a cool temperature. The compartments would not be part of the inner fridge. They would have dials which controls the ingress of a little bit of fridge air to select temperatures between cool to warm.

----------------------------

The Attached Diagram is a concept for an after market container by which a tube sips air from inside the fridge to give a cool container. This could sit on a counter or attach to the body of the fridge. There is something I could say which is important, but I will not reveal that hear.

camera On / Save Switch

This is a public disclosure of a patentable process for combining the On/Off and Power Save feature on cameras into one function, On/Save Pressure Plates. This disclosure does not grant or imply permission to copy the idea or concept. Involving me in the process of the developing the design would be the right thing to do.

Cameras will be made this way in the near future. I have saved correspondence from Kodak Canada, whereby I disclosed this concept. On - Save is my copy rite title for for the function.

-----------------

History - After the introduction of battery operated cameras, a mechanism was installed to save batteries. The camera would shut down after a period of inactivity. Some cameras allow adjustment of the inactivity time.

Soon after, enough users found the auto save so annoysome that cameras were made whereby power save could be shut off.

(The camera I own has no control over power save and it has been a frustrating product with many lost photo opportunities.)

As per the Attached image, the best system would be pressure points on the handle with quick on as soon as the user holds the camera. Whether the user puts the camera down, or lets the neck strap hold it, the camera would go off as soon as one lets go. This would save batteries. With the quick on capability of modern cameras, when the user puts a hand hold on the camera, it would be on and ready for the shot by the time it is brought to position at the eye.

weed eater - automatic line feed

This is a public disclosure of a patentable process for the automatic feeding of the cutting string from weed eaters. This disclosure does not grant or imply permission to copy the idea or concept. Involving me in the process of the developing the design would be the right thing to do.
-----------------------------
Presently, there is a cumbersome and inconvenient way to lengthen the string. You have to find a hard patch of earth and pound the machine to release the string brake. Sometimes too much string is released and constant attention must be paid as to when the string is getting shorter. (As the string shortens, the machine revs higher and this is one indication of when to pound the machine.)
The solution is to have an automatic sensor which gauges the string length and releases the brake. There are at least 4 different mechanical and instrument systems I can think of that would gauge when the string gets shorter. Upon release of the string the same, chosen, system would detect the lengthening and engage the brake again.
The operator could mow away with attention to string feed. it would all be automatic.
--------------------------
There is a string feed system which complements this system. I will not reveal that here.